Lufft VENTUS-UMB Ultrasonic Wind Sensor with Heater

Ships in 2-3 Weeks
Couldn't load pickup availability
The accurate wind sensor uses the run-time differential method for determining the wind speed and wind direction. It provides output for instantaneous values, vector and scalar means, the maximum gust of wind and wind direction, the maximum/minimum values and the virtual temperature. Data output through serial or analogue interfaces provides compatibility of the Lufft Ventus for commercially available hydrometeorological dataloggers and PLC systems. An automatic heater ensures reliable operation even in harsh environmental conditions.
Wind speed, wind direction, virtual temperature, barometric pressure
Ultrasonic
Wind detection with birdproof construction, maintenance-free measurement, suitable for extreme ambient conditions, ice-free operation, vibration and seawater resistant, compatible interfaces
SDI-12, RS-485 with supported protocols Binary, ASCII, NMEA, Modbus & analogue output
Highlights:
- Measuring wind direction and speed insusceptibly to bird nesting thanks to roofed construction
- Built-in data pre-processing, universal interfaces and selectable output protocols – compatible with OTT-dataloggers, commercially available HydroMet dataloggers and PLS systems
- Maintenance-free operation – no moving parts that can wear out thanks to ultrasonic measuring method; no need for re-calibration
- Suitable for all climate zones; also for solar-powered automatic meteorological stations
- Integrated heater that can be switched on if there is danger of frost – guarantees ice-free operation in extremely low temperatures until -40 °C
- Vibration and seawater resistant – also applicable in coastal regions
- Successfully tested and certified in extreme ambient conditions (temperature, air humidity, electromagnetic compatibility, vibration, salt spray, and icing)
- Embedded algorithms that provides the wind speed and direction as actual and averaged values
- Wind gust calculation regarding WMO (Guide to Meteorological Instruments and Methods of Observation)
The robust and maintenance-free wind sensor is designed for professional meteorological applications in all climate zones. It delivers reliable data, even in extreme ambient conditions.
Examples of Use:
- Synoptical automatic weather stations of meteorological services
- Weather stations at airports, marinas and onboard ships
- Wind turbine control
- Weather observation for road and traffic control systems
- Mountain weather stations for avalanche and flood warning
- Hydro-meteorological stations
LUFFT VENTUS-UMB | 8371.UM |
---|---|
Dimensions | Ø approx. 150 mm, height approx. 200mm |
Weight | approx. 1.7kg |
Wind direction | |
Principle | Ultrasonic- 2.4Ghz |
Measuring range | 0.1…359.9° |
Resolution | 0.1° |
Accuracy | ±2° RMSE >1.0m/s |
Start-up Threshold | 0.1m/s |
Wind speed | |
Principle | Ultrasonic- 2.4Ghz |
Measuring range | 0…75m/s |
Resolution | 0.1m/s |
Accuracy | ±0.2m/s or ±2% of reading, whichever is greater |
Start-up Threshold | 0.1m/s |
Unit | m/s; km/h; mph; kts |
Virtual temperature | |
Principle | Ultrasonic |
Measuring range | -58...+158°F (-50°C...+70°C) |
Resolution | 0.1 K |
Accuracy | ±2.0K (without heater and without sun exposure) |
Measuring rate | 60 partial measurements/15 full measurements per second |
Measurement output rate | 1-10 seconds adjustable, default 10s |
Air pressure | |
Principle | MEMS Capacitive |
Measuring range | 300…1200 hPa |
Accuracy | ±0.5 hPa |
Data output digital | |
Interface | RS 485 semi-/full duplex, isolated |
Baud rate | 1200-57600 |
Measurement rate instantaneous value | 1-10s |
Measurement Avg (arithmetic, vector), Min, Max | 1-10min |
Status | Heating, sensor failure |
Data output analog | |
only semi-duplex mode | |
output signal | 4-20mA, 0...10V frequency (instantaneous, avg, min, max) |
Load | max.300 Ohm |
Resolution | 16bit |
General Information | |
Operating temperature | -40..+60°C (with heating) |
Bus operation | up to 32 devices |
Operating voltage electronics | 24 VDC ±10 % or 24 VDC/1.2 VA |
with heating | 24 VDC, max. 240 VA (140 W + 100 W) |
connection | 8 pole plug |
Housing material | Anodized aluminium, seawater-proof |
Protection | IP 65 |
Pole diameter | 50 mm / 2" |
factory certificate | yes |
Jarring test | According to IEC 60945 |
Corrosion test | According to MIL-STD-810 Method 509.3 |
Ice-free test | According to MIL-STD-810F Method 521.2 |