1405-PK-040 Gill WindSonic Ultrasonic Anemometer, RS 232, RS485, RS422 RS 232, RS485, RS422 + 0-5V or 4-20ma Outputs

A lightweight unit, the WindSonic Ultrasonic Anemometer, manufactured by Gill Instruments, is of a robust, high strength construction. Without the need for expensive on-site calibration or maintenance, and with a corrosion free exterior, WindSonic is a true fit and forget unit.

The flexible design enables you easily to configure WindSonic to deliver the information you require. By using the software provided it is possible to select the output rate and choose the units of measurement that suit your application. Ensuring accuracy and reliability, WindSonic automatically transmits an anemometer status code with each output to indicate its operating status. Available in several options, providing a number of different digital and analog outputs, WindSonic is supplied with NMEA and RS232 digital output as standard.

Maintenance free, quick and easy to install, WindSonic is designed to be mounted using a standard pole fitting and comes complete with all screw fittings, a mating marine grade connector, and comprehensive user manual.

• Consistent performance throughout life (no accuracy degradation due to wear of moving parts)
• Corrosion free, UV resistant material
• Low start speed (0.01 m/s, 0.09 knots)
• Maintenance free
• No calibration required
• Robust construction
• Software configurable
• Status code output
• True 0-359° operation (no dead band on direction output)
• Wind speed and direction from a single unit
• Includes 50' of cable and connector

Specifications

Wind Speed
Range: 0-60 m/s (116 knots)
Accuracy: ±2% @12 m/s
Resolution: 0.01 m/s (0.02 knots)
Response time: 0.25 seconds
Threshold: 0.01 m/s

Wind Direction
Range: 0-359° (no dead band)
Accuracy: ±3° @12 m/s
Resolution: 1°
Response time: 0.25 seconds

Measurement
Ultrasonic output rate: 0.25, 0.5, 1, 2 or 4 Hz
Parameters: Wind Speed & Direction or U and V (vectors)
Units of Measure: m/s, knots, mph, kph, ft/min

Outputs
989-1: RS232
989-2: RS232 + RS422 + RS485 + NMEA*
989-3: RS232 + RS422 + RS485 + NMEA*, 0-5 V or 0-20mA or 4-20mA
989-4: SDI-12 (refer to manual for technical specification)
989- M: RS232 + RS422 + RS485 + NMEA*
Baud rate: 2400 to 38400
Anemometer status: Supplied as part of standard message
* NMEA 0183

Power Requirement
Anemometer
5-30 Vdc Option 1 & 2
7-30 Vdc Option 3
9-30 Vdc Option 4
From 5.5mA @ 12 V
Option M Anemometer 5-30 Vdc (5.5mA @ 12V)
Option M Optional Heating 24 Vac/Vdc (3.5A @ 24V) or 12 Vac/Vdc (2.1A @ 14V) (24V supply recommended)
Start up time < 5 seconds

Mechanical
External construction:
Option 1-4: LURAN S KR 2861/1C ASA/PC
Option M: Aluminum Alloy 6082 T6, hard anodized
Size: 142mm x 160mm
Weight: Option 1-4: 0.5kg, Option M: 0.9kg

Environmental
Protection class: Option 1-4: IP65, Option M: IP66
Operating temperature: -35°C to +70°C
Option M with optional heating: -40°C to +70°C
Storage temperature: -40°C to +80°C
Operating humidity: < 5% to 100% RH
EMC: Option 1-4: EN 61326: 1998, Option M: EN 61326: 1998 & BSEN 60945
Impact resistance: Option M: UL2218 Class 1

Operational
MTBF: 15 years
Warranty: 2 years
Factory calibration: Traceable to National Standards

Accessories
Pipe mounting: 44.45mm (1.75 in) diameter
Wind Software: Display/Logging software, provided with sensor
Cables: Available to match output options
Display: See Wind Tracker

Data Sheet